Issue With Settings On Pfaff Creative 3.0.

Sewing settings

Twin needle

Touch the twin needle icon to open a list for twin

needle width selections. When a twin needle size is

selected, the width of all stitches is limited for that

needle size to prevent needle breakage. The setting

is kept until you deselect the twin needle width.

The stitch width of the selected stitch will

DXWRPDWLFDOO\EHDGMXVWHGWRÀWWKHWZLQQHHGOH

If you select a stitch that is too wide for the twin

needle size, a waring pop-up will appear. Select

"off" in the twin needle list to deselect twin needle

and go back to normal sewing.

6WLWFKZLGWKVDIHW\

Select this function when using the straight stitch

needle plate or a straight stitch presser foot to lock

the needle in center position for all stitches. Stitch

width safety will prevent damage to the needle

and/or presser foot.

When turning on the machine with this setting

activated and for every stitch selection that is not

a straight stitch, a pop-up informs you that it is set

to straight stitch. Deselect stitch width safety to go

back to normal sewing.

Note: Twin needle and stitch width safety cannot be used

at the same time.

Presser foot pressure

In some cases, you might need to adjust the presser

foot pressure. Specialty techniques or thick fabric

may require an adjustment. The higher the number

the more pressure on the fabric.

Automatic presser foot lift

When selected, the automatic presser foot lift is

activated. The presser foot will raise to pivot height

for example when stopping with the needle in the

down position. When deselected, the presser foot

will stay lowered even if the machine stops with the

needle in down position.

Thread snips for sewing

When selected, the automatic thread snips are

activated. The threads are cut automatically and the

presser foot raises when sewing is complete, e.g. a

buttonhole. When deselected, no automatic thread

snip will be performed.

(PEURLGHU\VHWWLQJV

Presser foot height

Adjust the height of the presser foot in Embroidery

stitch-out mode. Use the + and - icons to either raise or

lower the height of the presser foot.

Some embroideries may build up under the presser

foot. If there is not enough space between the presser

foot and the embroidery, the top thread will form

loops on the underside of the embroidery. Increase the

presser foot height in small steps until the embroidery

moves freely under the presser foot.

Note: Since the Dynamic Spring Foot 6D (optional 820991-

096) measures the fabric thickness, the option to adjust

presser foot height in embroidery is only available if Dynamic

Spring Foot 6D for embroidery is deselected.

'\QDPLFVSULQJIRRW'

When embroidering, use the optional Dynamic spring

foot 6D (part number 820991-096, available at your

authorized PFAFF

® dealer). Activate the "Dynamic

spring foot 6D" function.

If using another type of embroidery foot, e.g.

Embroidery/Sensormatic free-motion foot 6A,

deactivate Dynamic spring foot 6D in the settings menu.

&XWMXPSVWLWFKHV

Your machine features the automatic function Cut jump

stitches. This function saves you time trimming after

the embroidery is completed. When Cut jump stitches

is selected your machine will trim the top jump stitch

thread and pull the thread end to the underside of the

fabric as you embroider. When deselected, the machine

will stop after a few stitches in every color change to let

you cut the threads manually.

https://www.pfaff.com/SiteMedia/PFAFF/Products/Machines/creative-line/creative3_0/Manual/creative_3_0-manual-EN.pdf

3.3 and 3.4

https://www.manualslib.com/manual/860029/Pfaff-Creative-3-0.html?page=103

https://www.pfaff.com/SiteMedia/PFAFF/Products/Machines/creative-line/creative3_0/Manual/creative_3_0-manual-EN.pdf

https://sewingiscool.com/troubleshooting-pfaff-sewing-machine/

Thanks