1993 Oldsmobile 88 Support Question
Find answers below for this question about 1993 Oldsmobile 88.Need a 1993 Oldsmobile 88 manual? We have 1 online manual for this item!
Current Answers
Answer #1: Posted by bengirlxD on January 23rd, 2013 1:46 PM
-
- 1
Open the hood of your Oldsmobile and support it with the prop rod. Locate the access hole above the headlight; there is one above each headlight, allowing access to the bulbs.
- 2
Determine whether the high or low beam is not working. Changing either bulb uses the same process and they sit next to each other in the headlight assembly.
- 3
Reach into the access hole and turn the headlight bulb 1/4 turn, then pull the bulb straight back out of the retaining ring. There are three tabs on the bulb that must align with the slots on the retaining ring for the bulb to come out.
- 4
Disconnect the electrical connector from the base of the bulb after releasing the locking tab. Pull the connector straight off the bulb from the connector not the wires.
- 5
Connect a new bulb to the wiring harness connector, pressing the bulb and connector together until the locking tab engages. Install the new bulb into the back of the headlight housing then turn it to lock the bulb under the retaining ring.
- 6
Turn the headlights on to verify they are working. Cycle them through the high and low beam settings as well.
http://www.ehow.com/how_6077273_replace-headlight-olds-delta-88.html
- 1
Feel free to resubmit the question if you didn't find it useful.
Related Manual Pages
Similar Questions
Why wont my headlights turn on the parking lights the tail lights all other lights turn on except th...
how to replace the water pump?
I have replaced the starter and engine switch and relay fuses, it still wont start. If you cross ove...
Is there anything special to know on how to remove and replace the electronic control module