Lexmark E260D Support Question
Lexmark E260D Support Question
Find answers below for this question about Lexmark E260D - Taa/gov Compliant.Need a Lexmark E260D manual? We have 5 online manuals for this item!
Question posted by tuckbneina on September 17th, 2014
Lexmark E260d Wont Print
The person who posted this question about this Lexmark product did not include a detailed explanation. Please use the "Request More Information" button to the right if more details would help you to answer this question.
Current Answers
Answer #1: Posted by freginold on October 13th, 2014 12:49 PM
freginold
Member since:
December 20th, 2011 Points: 23,253,885
Member since:
December 20th, 2011 Points: 23,253,885
Hi, without knowing any specifics about your network or how the printer is set up, here are some common reasons why it might not print:
- Wrong IP address in the print driver
- Wrong print driver
- Bad network connection
- Printer is out of paper/toner
- Printer has a paper jam or a door open
- User authentication management is turned on
- There is a corrupted print job stuck in the queue holding everything else up
Check the print queue to be sure there are no stuck jobs (if there are, cancel them). Check the printer to be sure it has paper, has toner, and there are no error messages or error lights. Verify that the IP address on the printer's config page matches the IP address in the print driver properties. If it still won't print, reboot both your computer and the printer, and if that doesn't work, uninstall and reinstall your print driver.
- Wrong IP address in the print driver
- Wrong print driver
- Bad network connection
- Printer is out of paper/toner
- Printer has a paper jam or a door open
- User authentication management is turned on
- There is a corrupted print job stuck in the queue holding everything else up
Check the print queue to be sure there are no stuck jobs (if there are, cancel them). Check the printer to be sure it has paper, has toner, and there are no error messages or error lights. Verify that the IP address on the printer's config page matches the IP address in the print driver properties. If it still won't print, reboot both your computer and the printer, and if that doesn't work, uninstall and reinstall your print driver.
Related Lexmark E260D Manual Pages
Maintenance Guide - Page 9
...print quality of the photoconductor kit.
Place the unit on a flat, clean surface.
3 Press the button on the toner cartridge
handle. Pull the toner cartridge up and out using the handle.
4 Unpack the new photoconductor kit. Maintaining the printer...pressing the button on the left side of the printer and lowering the front door. 2 Pull the photoconductor kit and toner cartridge together as a unit ...
User Guide - Page 4
Canceling a print job...64
Canceling a print job from the printer control panel 64 Canceling a print job from the computer ...64
Setting Jam Recovery...65
Understanding printer menus 66
Installing the Local Printer Settings Utility 66 Using the Local Printer Settings Utility...66 Using the Finishing menu...67 Paper menu...68
Default Source menu ...68 Size/Type menu ...68...
User Guide - Page 9
... specialty media • Loading paper • Performing printing depending on your printer model • Configuring printer settings • Viewing and printing documents and photos • Setting up and using the printer software
Find it better.
User's Guide-The User's Guide is available on the Lexmark Web site at http://support.lexmark.com. Windows or Mac Help-Open...
User Guide - Page 31
Blinking - Interpreting the printer control panel lights
31
Wait or press .
Light sequence
Hex Trace Ready - Blinking
Flushing Buffer - Slowly Blinking
Busy - Blinking
What to do Use Hex Trace to troubleshoot printing problems. Turn the printer off, and then on to return to the Ready state. Wait until the printer returns to the Ready state.
User Guide - Page 35
... or secondary jam code to read:
Light sequence
What to do
• Press and release to clear
the light sequence and continue processing the print job.
• With the printer turned off,
remove the toner cartridge and shake it to extend its life.
• Replace the toner cartridge,
and then turn the...
User Guide - Page 61
... up to verify that: - Zone coating of the envelopes. When printing on the Lexmark Web site at a higher fusing temperature up to fit the width of...lexmark.com. For detailed information on label printing, characteristics, and design, see the Card Stock & Label Guide available on card stock:
• Make sure the Paper Type is not possible, remove a 2-mm (0.06-in .)
away from the printer...
User Guide - Page 64
... Applications. 2 Double-click Utilities, and then double-click Printer Setup Utility or Print Center. 3 Double-click the printer icon.
The printers folder opens.
2 Double-click the printer icon. 3 Select the job to print, a small printer icon appears in the printer window.
2 Select a job to appear before resending the print job. Printing
64 From the Windows taskbar: When you send a job...
User Guide - Page 76
...:
• 90 seconds is the factory default setting. • When the timer expires, any partially printed page still in seconds the printer waits to see if any new print jobs are waiting.
• Print Timeout is printed, and then the printer checks to receive an end-of-job message before it goes into a reduced power state...
User Guide - Page 117
....
Troubleshooting
117
Ghost images
These are possible solutions. From the Settings tab, click Paper Menu.
• If the printer is connected to print. To access the Quality menu, do one of the following :
• If the printer is on a network, access the Embedded Web Server by a USB or parallel cable, open the Local...
Service Manual - Page 24
... the printer. Contain windows, holes, perforations, cutouts, or embossments -
If jams do occur with the print media, then try feeding
one sheet at www.lexmark.com ...Slotted screwdriver
1-8 Lexmark™ E260, E260d, E260dn 4513-200, -220, -230
Most paper jams can help prevent paper jams:
• Use only the recommended print media. • Do not overload the print media sources. ...
Service Manual - Page 30
... invalid refill
Missing or defective print cartridge
Unsupported print cartridge
Photoconductor kit life warning¹ 12
Programming engine code/
13
Programming system code
Service error²
13
Printer error³
13
2-4 Lexmark™ E260, E260d, E260dn
Service Manual - Page 37
.... Other buttons are ignored.
Resolution reduced while canceling job
Meaning
The printer is processesing data and/or printing and the resolution of the page belonging to the currently printing job has been reduced from 600 dpi to 300 dpi in the toner cartridge is invalid. Diagnostics information...
Service Manual - Page 44
... clear the paper jam.
202: Paper jams as a printed job exits the printer
Meaning
A paper jam has occurred as the print media is most likely in the manual feeder. Action
Open the rear door, and clear the paper jam.
2-18 Lexmark™ E260, E260d, E260dn
Action
Open the rear door, and clear...
Service Manual - Page 51
...61548;
Meaning
The toner in the controller board or network card is displayed. It may be changed without calling Lexmark for a one-time change.
Action
Remove the toner cartridge, and install a new toner cartridge that matches ... to clear the light sequence and continue processing the print job. • Turn the printer off. • Remove the toner cartridge, and shake it to the...
Service Manual - Page 52
... low, or a defective toner cartridge has been detected. The option will be ignored.
2-26 Lexmark™ E260, E260d, E260dn
Action
• Press and release Continue to clear the light sequence and continue processing the print job. • Turn the printer off . • Remove the toner cartridge, and replace it with a supported toner cartridge. •...
Service Manual - Page 94
Note: The light sequences change relative to the option on the printer. 4513-200, -220, -230
Configuration Menu printout
(sample only;
Lexmark E260d, E260dn Lexmark E260d, E260dn
3-2 Lexmark™ E260, E260d, E260dn use actual sheet).
Service Manual - Page 95
Diagnostics mode printout sample
(sample only;
Diagnostic aids 3-3 use actual sheet)
4513-200, -220, -230
Lexmark E260d, E260dn
Note: The light sequences change relative to the options on the printer.
Service Manual - Page 97
... after a line feed control command.
Values
Off On Auto (default)
Standard Fastbytes (default)
Off On (default)
Off-The printer filters PostScript print jobs using the Macintosh operating system. Set to fail.
On-The printer processes raw binary PostScript print jobs from computers using either Windows or Macintosh operating systems.
Diagnostic aids 3-5 Auto (default)-The...
Service Manual - Page 98
...
Off
On
Auto (default)
Off-The printer filters PostScript print jobs using either Windows or Macintosh operating systems.
3-6 Lexmark™ E260, E260d, E260dn Auto (default)-The printer processes print jobs from computers using the Macintosh operating system. MAC Binary Configure the printer to fail. On-The printer processes raw binary PostScript print jobs from computers using Standard...
Service Manual - Page 99
... connection speed of the network. On-The printer processes raw binary PostScript print jobs from computers using either standard network or network opt ). Auto (default)
MAC Binary PS
Configure the printer to the printer and query printer status information Off
simultaneously. Diagnostic aids 3-7 Auto (default)-The printer processes print jobs from computers using Standard protocol. Menu...
Similar Questions
My Lexmark X7170 Printer Says Right Cartridge Incorrect And Wont Print How Do I
fix this
fix this
(Posted by frsassey 10 years ago)
How Do I Add The Lexmark 260d Printer To My Laptop?
(Posted by chanmoi7 11 years ago)