Kyocera FS 1128 Support Question
Kyocera FS 1128 Support Question
Find answers below for this question about Kyocera FS 1128 - MFP.Need a Kyocera FS 1128 manual? We have 1 online manual for this item!
Question posted by spaffordb on September 13th, 2012
Kyocera Fs 1128
How do you print to cassette 2 in kyocera FS 1128 without pushing a button?
Current Answers
Related Kyocera FS 1128 Manual Pages
FS-1028MFP/1128MFP Setup Guide Rev-1 - Page 3
Prolonged use
without sufficient clearance may cause overheating.
If the machine is FS-1128MFP, the modular cord with the attached ferrite core is enclosed. IMPORTANT: Place the machine in a stable position. SETUP GUIDE
3 Unpacking
1 Unpack the machine and ...
FS-1028MFP/1128MFP Setup Guide Rev-1 - Page 5
SETUP GUIDE
5
Preparations
6 Push the lock lever back into place. 3 Shake the toner container horizontally 5 or 6 times so that the toner inside becomes evenly distributed.
4 Remove the orange protective seal.
5 Push on the PUSH marks on the toner container until the container clicks into its LOCK position (away from you).
7 Close the front cover.
FS-1028MFP/1128MFP Setup Guide Rev-1 - Page 6
... the paper, then tap it on the release buttons and sliding paper stopper to fit the size of the cassette.
3 Adjust the paper width by pressing in on a level surface to avoid media jams or skewed printing.
5 Place the paper in the cassette, with side to be printed downward, so that the leading edge is...
FS-1028MFP/1128MFP Setup Guide Rev-1 - Page 7
...: Do not exceed the upper limit of the cassette. Otherwise, it may cause paper jams.
6 Push the cassette securely all the way back into the machine until it stops. Preparations
Connecting Cables
1 Turn the power switch off (O).
2 Connect the machine to the PC or your network device. These cables are sold separately.
When using...
FS-1028MFP/1128MFP Setup Guide Rev-1 - Page 8
The machine begins to copy will appear on (|). Once the toner has been replenished, Ready to warm up. Connecting Modular Cords (FS-1128MFP only)
1 Turn the power switch off (O).
2 Be sure to the machine and the other end into a power outlet.
4 Turn the power switch on the ...
FS-1028MFP/1128MFP Setup Guide Rev-1 - Page 17
... displays basic information about the machine and COMMAND CENTER as well as the URL, e.g. Description Specifies a name for network printing and sending e-mail.
The table below provides a summary of those settings in the machine. Item Host Name
LAN Interface
... on the left to view and set as the WSD device name. This name is used as the NetBEUI printer name and as admin00.
FS-1028MFP/1128MFP Setup Guide Rev-1 - Page 18
... is recommended that the machine be a times where transmission is turned On, the IP addresses and server information are obtained via DHCPv6 based on the printing system network component.
Specifies the IP address of the IP address is recommended that starts with a number between 192 and 223, it is four-byte...
FS-1028MFP/1128MFP Setup Guide Rev-1 - Page 19
... to connect to select a different user, select Other and enter the login account name and login password for Authenticate as the protocol.
When the Test button is selected for Authenticate as the Authentication Protocol. If entering the name, rather than the IP address, a DNS server address must be used for authentication...
FS-1028MFP/1128MFP Setup Guide Rev-1 - Page 20
... must be permitted or rejected.
Accessing COMMAND CENTER
Item Sender Address
Signature Domain Restriction
Description
Enter the E-mail address of the person responsible for the printing system, such as a file in a desired folder on the scanner SMB page. The table below provides a summary of the e-mail body. Set the SMB default...
FS-1028MFP/1128MFP Setup Guide Rev-1 - Page 29
...installation
dialog boxes differs slightly, the installation procedure is the same.
2 Select the print system to the correct procedure for standard connection methods.
1 In the installation method selection... window, select Express Mode. If the installer does not detect a print system, check that the print system is turned on. This will be installed and click Next.
3 You ...
FS-1028MFP/1128MFP Setup Guide Rev-1 - Page 30
...items such as optional features installed in the print system. This completes the printer driver installation procedure. Custom Mode
Use Custom Mode if you can also specify the device settings after you click Finish, you want...installed. For example, if you exit the installation.
If the device setup dialog box appears after you do not want to specify the printer port and select the ...
FS-1028MFP/1128MFP Setup Guide Rev-1 - Page 31
.... If an IP or AppleTalk connection is automatically recognized and connected.
8 Open System Preferences and click Print & Fax.
9 Click the plus symbol (+) to be installed. SETUP GUIDE
31
5 Double-click Kyocera OS X vx.x.
Installing Printer Driver
6 The printer driver installation program starts up.
7 Choose Select Destination, Installation Type and then install the...
FS-1028MFP/1128MFP Setup Guide Rev-1 - Page 32
This completes the printer setup procedure. Setting TWAIN Driver
Register this machine to the TWAIN Driver.
1 Select Start button of the Windows display, All Programs, Kyocera and then TWAIN Driver Setting.
32
SETUP GUIDE Installing Printer Driver
10 Click the IP icon for an IP connection or the AppleTalk icon for ...
FS-1028MFP/1128MFP Setup Guide Rev-1 - Page 33
... GUIDE
33
Installing Printer Driver
NOTE: You can also add the machine to a PC when selecting Start of the Windows
display, Control Panel and then Kyocera TWAIN.
2 Click Add.
3 Enter the machine name in the Name field.
4 Click T next to 64 characters) and then click OK.
7 Click OK. If user login...
FS-1028MFP/1128MFP Setup Guide Rev-1 - Page 36
Rev.1 2010.1 Printed in China 302H956021
Similar Questions
