Husqvarna MZ 5225 Support Question
Husqvarna MZ 5225 Support Question
Find answers below for this question about Husqvarna MZ 5225.Need a Husqvarna MZ 5225 manual? We have 2 online manuals for this item!
Question posted by ewhite7748 on September 26th, 2014
Blades Turn Slowly
I have a husqvarna mz 5225 while cutting the blades will stop turning and then speed up cutting and then slow back down. i checked the belt and it seems to be tight enough, what else could cause this to happen.
Current Answers
Related Husqvarna MZ 5225 Manual Pages
Owners Manual - Page 3
...the Engine 26
Jumper cables 30 Running 31 Operating on hills 32 Mowing Tips 33 Stopping the Engine 34 Pump release valves 35 Maintenance 36 Maintenance Schedule 36 Battery 38 ... Fuel Filter 42 Tire Pressures 42 Parking Brake 43 V-belts 43 Deck belt 44 Pump Belt 45 Cutting Blades 45
Blade replacement 46 Adjusting the Mower Deck 47
Leveling deck 47 Anti-scalp rollers 48 Cleaning...
Owners Manual - Page 5
... normal driving direction. Lawn mowers and all who are provided with this machine, it may cause damage to the drive ...performance. Operating instructions for mowing grass on Public Roads
Check applicable road traffic regulations before using or servicing the...and ensure that the machine is built for purchasing a Husqvarna ride-on public roadways. INTRODUCTION
Congratulations
Thank you for...
Owners Manual - Page 9
..., and remove keys before operating. IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. Stop machine if anyone . Always turn off engine and wait for all times.
• Only allow responsible adults, who are for use by the blades.
• Be sure the area is clear of objects before...
Owners Manual - Page 11
...cause the machine to side
6003-004
WARNING! Tall grass can hide obstacles.
• Choose a low ground speed...slow and gradual.
Tires may lose traction.
• Avoid starting, stopping, or turning on all movement on wet grass. If the tires lose traction, disengage the blades and proceed slowly... blades....speed or direction, which can affect the stability of injury if an accident does...
Owners Manual - Page 12
... is over by putting your view of a child. Never assume that may fall off and be seriously injured or interfere with the blades shut off if a child enters the area.
• Before and while backing, look behind and down for another ride and be.... Children are often attracted to the presence of a responsible adult other than the operator.
• Be alert and turn machine off .
Owners Manual - Page 16
...parking brake, turn off the ... truck or trailer by hand. They may jackknife or overturn causing damage to the mower and possibly serious injury to the transport vehicle. If injured by...suitable strength using a slow speed. Escaping hydraulic oil under pressure can cause cuts and gashes. Wrap the blades or use protective gloves when handling them.
• Check the parking brake's functionality...
Owners Manual - Page 18
... via a belt-driven hydraulic pumps. Parking brake 3. Blade switch 5. Fuel tank cap 9. Hour meter 13.
Control Locations
98
7
Transmission from the engine is regulated and thereby the direction and speed.
13
2
1 10 11
12
6
54 3
1. Throttle control 4. Fuel shut off valve 10. Motion control levers 2. CONTROLS
This operator's manual describes the Husqvarna Zero Turn Rider...
Owners Manual - Page 25
... in the reverse position they may cause the mower to the furthest forward or reverse positions during initial operation, or until the mower stops or slows dramatically. Pull back slightly on control levers to idle, disengage parking brake, do not engage blades at this time, rotate control levers inward. To turn to neutral when released. Until operator...
Owners Manual - Page 31
Release the parking brake by setting the cutting height pin into the desired hole. WARNING! The machine's speed and direction are in a straight line forward or backward respectively. Make sure the work area is free from objects that no one is near mower when engaging blade switch.
5. Ensure that could be thrown by the rotating...
Owners Manual - Page 32
... of the mower and press forward to regain forward motion.
• Make all turns slowly. Do not drive up or down hills with slopes greater than 10 degrees. IMPORTANT INFORMATION
When in the "Safety Instructions". Turning on the spot (zero turn) can be used before starting up or down hills.
• Avoid stopping or changing speed on...
Owners Manual - Page 33
... speed (the rider moves slowly). Never drive the rider on top surface, engine and electrical components.
• When the mulching kit is used without negatively affecting the mowing result.
• The finest lawns are obtained by the blades. The mowing result is poorer because the wheels sink into the transport position.
When cleaning, the mower...
Owners Manual - Page 34
Turn the ignition key to the stop
8061-011 operation
Stopping the Engine
Allow the engine to idle a minute in neutral position to stop position.
8061-013
Disengage the mower deck and move throttle to prevent unauthorized use.
Cut height selection
8061-011
English-34
Place controls in order to the minimum position (tortoise symbol). Avoid idling...
Owners Manual - Page 37
... Blade-switch in the disengaged position. • Turn the ignition switch to Lubrication Schedule Check ... hours) Clean fins of belts, belt pulleys Change the engine oil...Check/adjust the mower deck Check the engine valve clearance 3) Perform the 300-hour service 3) Lubricate according to "OFF" position and remove the key. • Make sure the blades and all moving parts have completely stopped...
Owners Manual - Page 39
...turned a ¼ turn from the seated position.
7. A used spark plug should be .030" (0.75 mm). Replace the ignition cable. The parking brake is compressed. Make daily inspections to ensure that the engine stops if the mower blades...locked neutral position.
3. Check the spark plug. Tightening the spark plugs too hard can damage the engine. The engine can cause overheating and damage the...
Owners Manual - Page 44
... surface. Adjust tension.
8. MAINTENANCE
Deck belt
Deck belt removal Park on the engine shaft.
2. Remove the belt from around spring loaded idler pulley.
4. The belt can now be removed. Double check belt routing to tension belt.
6. Remove any twist. Push inward on the engine shaft.
6. Using a ratchet with fasteners.
5
Belt routing, deck belt
8011-622 8011-580
English-44...
Owners Manual - Page 47
... insure accuracy of the mower deck. Turn both side-to leveling deck.
1. Blades are inflated to the opposite side, check that measurement is required, loosen the locknut and move mounting bolt up or down in slot until rear of mower deck is on the discharge side of leveling procedure, mower deck drive belt must be adjusted slightly...
Owners Manual - Page 54
... engine running at normal speeds, the transaxle is cold and adjusted accordingly. Check the oil level and ...to disposal.
Lack of power or drive after stopping the engine.
4. Pump filter 2. If not... oil has been added to one full turn after the filter gasket contacts the filter ... moves smoothly forward and reverse at fast idle, slowly move the directional control in your area.
5....
Owners Manual - Page 55
... starter safety circuit.
Cause
• Blade switch is engaged. • Steering controls are incorrectly balanced. • The engine is loose. See Checking the Safety System in hydraulic system. The machine vibrates.
• The blades are loose. • The blades are not locked in...English-55 TROUBLESHOOTING
Problem The engine will not start. The starter does not turn the engine over.
Owners Manual - Page 56
... or
has come off. • Air trapped in hydraulic system.
Mower deck not engaging.
English-56 Battery not charging.
Uneven mowing results.
• Unequal tire pressure on pump open. • Drive belt for the mower deck is uneven. • Blades are dull. • Driving speed too high. • Grass is faulty or has come loose...
Owners Manual - Page 76
...Husqvarna; All care and maintenance instructions must be delivered at the owner's residence.) EZ & MZ Zero Turn...rust, corrosion, or any Husqvarna product used , but not limited to, belts, blades, blade adapters, bulbs, clutches, ...safety, or durability, or causes the product to fail to ...Year Consumer Warranty: Automatic mower, all Residential Zero Turn Riders, all lawn, yard and garden tractors...
Similar Questions
Husqvarna Riding Lawn Mower Starts, Blade Spins, Won't Go Forward Nor Reverse
(Posted by shywolfalways82 3 years ago)
Blades Will Not Engage Once The Mower Has Been Running For A While.
Once mower has been running and after emptying bags, the PTO pulled up will not engage blades. If it...
Once mower has been running and after emptying bags, the PTO pulled up will not engage blades. If it...
(Posted by abecker4 7 years ago)
Mz 5225 Won't Start After Use.
Mower starts righ up... cut about 1 1/2 acre lot. Turn off and engine won't even try to turn over an...
Mower starts righ up... cut about 1 1/2 acre lot. Turn off and engine won't even try to turn over an...
(Posted by reidj5931 9 years ago)
My Husqvarnarz4623 Lawn Mower
My husqvarna lawn mower will not start. It wont even try to turn over or click.
My husqvarna lawn mower will not start. It wont even try to turn over or click.
(Posted by teresaandbryancates 9 years ago)