Husqvarna HU550FH Support Question
Husqvarna HU550FH Support Question
Find answers below for this question about Husqvarna HU550FH.Need a Husqvarna HU550FH manual? We have 2 online manuals for this item!
Question posted by Anonymous-166021 on February 23rd, 2020
How Much Oil Does It Take To Fill Hu550fh 140cc Briggs And Stratton Engine?
The person who posted this question about this Husqvarna product did not include a detailed explanation. Please use the "Request More Information" button to the right if more details would help you to answer this question.
Current Answers
Answer #1: Posted by Odin on February 23rd, 2020 1:00 PM
Odin
Member since:
April 10th, 2010 Points: 41,236,690
Member since:
April 10th, 2010 Points: 41,236,690
You receive a container of oil with the unit. Slowly
pour the entire container down the oil fill spout into the
engine. Always fill to the full line on the dipstick
Initial oil fill requires only 18 oz. because of residual oil
in the engine from the manufacturer's quality testing.
When changing oil you may need 20 oz.
pour the entire container down the oil fill spout into the
engine. Always fill to the full line on the dipstick
Initial oil fill requires only 18 oz. because of residual oil
in the engine from the manufacturer's quality testing.
When changing oil you may need 20 oz.
Hope this is useful. Please don't forget to click the Accept This Answer button if you do accept it. My aim is to provide reliable helpful answers, not just a lot of them. See https://www.helpowl.com/profile/Odin.
Related Husqvarna HU550FH Manual Pages
Operation Manual - Page 2
... use accessories approved by the blade.
• Be sure the area is not alert to prevent accidental starting . Wash hands after engine has stopped. Always look behind before operating a riding lawn mower.
WARNING: CHILDREN CAN BE INJURED BY THIS EQUIPMENT.
To avoid severe burns on a slope, do not mow it should start to...
Operation Manual - Page 3
... a truck or trailer bed with the engine (motor) running .
• Grass catcher components are outside mowing. SERIAL NUMBER
DATE OF PURCHASE
THE MODELAND SERIAL NUMBERS WILL BE FOUND ON ADECALATTACHED TO THE REAR OF THE LAWN MOWER HOUSING. PRODUCT SPECIFICATIONS
Gasoline Capacity and Type: Oil Type (API SG-SL):
Oil Capacity: Spark Plug (Gap: 0.030...
Operation Manual - Page 4
... and padding holding operator presence control bar to ensure proper tightness. Remove loose parts included with lower ("standard") knobs.
3.
IMPORTANT: THIS LAWN MOWER IS SHIPPED WITHOUT OIL OR GASOLINE IN THE ENGINE. Remove all parts and hardware you attempt to operating position and align holes in lower handle with the exception of this manual...
Operation Manual - Page 5
...handle is outside of this manual.
5
Tighten T-knob. To convert mower to be used as a mulcher.
Slowly pull engine starter rope out until rope will slip into grass bag with rigid ... BINDINGS
FIG. 3
FRAME OPENING
CONTROL BAR
UPPER HANDLE
ROPE GUIDE
T-KNOB
ENGINE STARTER ROPE
FIG. 4
TO INSTALL ATTACHMENTS
Your lawn mower was shipped ready to bagging or discharging, see "TO CONVERT...
Operation Manual - Page 6
...
WHEEL HEIGHT ADJUSTER (ON EACH WHEEL)
ENGINE OIL CAP WITH DIPSTICK
AIR FILTER
MUFFLER
HOUSING
IMPORTANT: This lawn mower is shipped WITHOUT OIL OR GASOLINE in literature supplied with your lawn mower or in the engine. MEETS CPSC SAFETY REQUIREMENTS
Our rotary walk-behind power lawn mowers conform to engage power-propelled
forward motion lawn mower.
6
STARTER HANDLE -
must be held...
Operation Manual - Page 7
... bar is equipped with an operator presence control bar which can result in decreased speed.
Medium position is not adjustable. HOW TO USE YOUR LAWN MOWER
ENGINE SPEED
The engine speed was set at the factory for - To stop when either the operator presence control bar or drive control bar are in the drive...
Operation Manual - Page 8
...UNLOCK LATCH
OPEN MULCHER DOOR
INSTALL DISCHARGE DEFLECTOR
SIMPLE STEPS TO REMEMBER WHEN CONVERTING YOUR LAWN MOWER
FOR MULCHING 1.
Rear door closed . 2. Discharge deflector installed. Never ... grass catcher in place. Mulcher door closed and locked.
CAUTION: Do not run your lawn mower without rear door closed .
• Open mulcher door and install discharge deflector...
Operation Manual - Page 9
... needed. it run until the fuel lines and carburetor are empty. Purchase fuel in engine from under dusty, dirty conditions.
TO START ENGINE
NOTE: Due to change the oil more often under lawn mower handle.
3.
Lift up on startup.
1.
ENGINE OIL CAP
GASOLINE FILLER CAP
GRASS CATCHER
FRAME HANDLE
FIG. 10
BAG HANDLE
FIG. 9
ADD GASOLINE (See...
Operation Manual - Page 10
... necessary to reduce ground speed and/or run the lawn mower over the area a second time.
• For extremely heavy cutting, reduce the width of cut by overlapping previously cut path and mow slowly.
• For better grass bagging and most cutting conditions, the engine speed should be set in the fast position...
Operation Manual - Page 11
... STORAGE
Check for Loose Fasteners Clean / Inspect Grass Catcher * Check Tires Check Drive Wheels *** Clean Lawn Mower **** Clean under Drive Cover *** Check Drive Belt / Pulleys *** Check / Sharpen / Replace Blade Lubrication Clean and Recharge Battery **
Check Engine Oil level Change Engine Oil Clean Air Filter Inspect Muffler Replace Spark Plug Replace Air Filter Paper Cartridge Empty fuel...
Operation Manual - Page 12
...
TO REPLACE BLADE (See Fig. 12)
1. Position blade on the mower.
• To check blade balance, you will cause eventual damage to lawn mower or engine.
• The blade can harm rubber.
• Avoid stumps, ... IS HEAT TREATED. Remove hubcaps, locknuts and washers.
2. If either end of gasoline, oil, or insect control chemicals which can be sharpened with balancer.)
NOTE: Do not use a...
Operation Manual - Page 13
...;rst. Clean by gently tapping on a flat the factory. Remove engine oil cap; Tip lawn mower on the dipstick. Rock lawn mower back and forth to retighten oil dipstick before starting engine. 9. Stop adding oil when you check the oil level. ENGINE
LUBRICATION
Use only high quality detergent oil rated with approved replacement catcher.
SAE VISCOSITY GRADES
5W-30
SAE 30...
Operation Manual - Page 14
...;re hazard and/or damage.
FITTING
FIG. 16
14 A clogged engine runs hotter and shortens engine life.
• Keep finished surfaces / wheels free of gasoline, oil, etc.
• We do not recommend using a garden hose to clean the outside of your lawn mower by scraping to remove build-up of trash or grass on...
Operation Manual - Page 15
...in contact with air filter and carburetor down.
4. Remove drive cover and belt keeper.
2. Turn lawn mower on its side with plug. TO REPLACE DRIVE BELT (See Figs. 17 and 18)
1. Reinstall blade ...on gearcase pulley.
6. Route the other end of belt retainer.
2. Install new belt on engine pulley, inside tabs of the new drive belt through hole in housing.
3. Reinstall belt keeper and drive ...
Operation Manual - Page 16
... properly due to the rear.
2. IMPORTANT: NEVERTAMPERWITHTHEENGINEGOVERNOR, WHICH IS FACTORY SET FOR PROPER ENGINE SPEED. LAWN MOWER
When lawn mower is running too fast or too slow, take your lawn mower handle for storage.
1. Be sure that suits you believe that the engine is to increase engine speed or it thoroughly, remove all dirt, grease, leaves, etc. Do not...
Operation Manual - Page 17
... gasoline can if your unit indoors and cover it run until the fuel lines and carburetor are empty.
• Never use plastic. Replace with clean engine oil. (See "ENGINE" in minimizing the formation of this manual).
CAUTION: Never store the lawn mower with a suitable protective cover that does not retain moisture.
Operation Manual - Page 18
... replace blade adapter.
8. Disconnected battery connector (if equipped). 12. Cutting too much oil in released position.
8. Cut at same height. 3. Worn, bent or loose blade. 2. Tighten blade bolt. 2. Tighten blade bolt. 2.
Bent engine crankshaft. 3. Clean grass catcher. Rear of lawn mower housing or cutting
blade dragging in heavy grass.
2. Raise cutting height...
Operation Manual - Page 19
... shown on ExhibitA, Transmission / Transaxle (including Drive Systems) are not covered by Briggs & Stratton, Honda, Kawasaki, or Kohler (with the exception of models equipped with your rights...following the preventative maintenance, storage, fuel and oil usages as outlined in those separate warranties. Depending on Exhibit A, all Engines and Attachments are NOT covered.
19 Please ...
Parts List - Page 3
..., Lawn Mower Housing Rod, Hinge Blade Adapter / Pulley Blade, 22" Washer, Hardened Washer, Helical Screw, Machine, Hex Head 3/8-24 x 1-3/8 Grade 8 Front Baffle Decal, Danger Screw, Hex Head 5/16 Washer, Flat Nut, Hex, Flanged 1/4-20 Screw, Hex Washer Head #13 x 3/4 Locknut, Hex 5/16-18 Bar, Lower Handle Handle Bolt Belt Retainer Engine, Briggs & Stratton, Model...
Parts List - Page 5
HU550FH (96143009600) PRODUCT NO. 961 43 00-96
KEY PART NO. inches. 1 inch = 25.4 mm. MODEL NO. IMPORTANT: Use only Original Equipment ...Screw, Hi-Lo Thread #12 x 5/8 Screw Drive Cover Assembly Locknut, Hex
KEY PART NO. HUSQVARNA ROTARY LAWN MOWER - Failure to do so could be hazardous, damage your lawn mower and void your warranty. NO.
32 532 44 32-62 33 532 19 68-53 35 532 43 11...
Similar Questions
Bagged Attachment
what is the part number for the grass bag for 961 43 00-96, HU550FH
what is the part number for the grass bag for 961 43 00-96, HU550FH
(Posted by Dennismorgan1953 7 years ago)
Grass Plastic Chute
My 550fh will not hold the plastic side chute when i'm mowing. It keeps falling off. Is this aproble...
My 550fh will not hold the plastic side chute when i'm mowing. It keeps falling off. Is this aproble...
(Posted by kooljay1 7 years ago)
My Husqvarnarz4623 Lawn Mower
My husqvarna lawn mower will not start. It wont even try to turn over or click.
My husqvarna lawn mower will not start. It wont even try to turn over or click.
(Posted by teresaandbryancates 9 years ago)