Husqvarna GT52XLSi Support Question
Husqvarna GT52XLSi Support Question
Find answers below for this question about Husqvarna GT52XLSi.Need a Husqvarna GT52XLSi manual? We have 1 online manual for this item!
Question posted by rockymtntom on August 14th, 2015
Mandrel Pulley Torque
What is the torque spec for the left mandrel pulley on a GT52XLSi,with a fabricated deck.
Current Answers
Answer #1: Posted by TommyKervz on September 10th, 2015 1:44 PM
TommyKervz
Member since:
January 10th, 2013 Points: 17,776,813
Member since:
January 10th, 2013 Points: 17,776,813
Related Husqvarna GT52XLSi Manual Pages
Owners Manual - Page 1
.../French L'utilisation d'essence contenant plus de 10 % d'éthanol annulera la garantie du produit.
586 38 22-32
Operator's Manual Manuel de L'Opérateur
GT52XLSi
Please read the operator's manual carefully and make sure you understand the instructions before using the machine.
Gasoline containing up to 10% ethanol (E10) is...
Owners Manual - Page 2
... riding mower safely enough to protect themselves and others from serious injury.
• Follow the manufacturer's recommendation for all times.
• Only allow the mower deck to roll over the edge or if the edge caves in daylight or good artificial light.
• Do not operate the machine while under the...
Owners Manual - Page 3
... alert and turn machine off and be a minimum of 12 year of age before operating a pedestrian controlled lawn mower and a minimum of 16 years of control.
• Travel slowly and allow extra distance to cool... bolts tight to ensure the equipment is not alert to cool before operating a riding lawn mower. Clean oil or fuel spillage and remove any adjustments or repairs with safe machine...
Owners Manual - Page 4
... the California Public Resources Code). PRODUCT SPECIFICATIONS
Gasoline Capacity and type: Oil Type: (API: SG-SL) Oil Capacity:
Spark Plug:
Charging System: Battery:
Blade Bolt Torque:
4 Gallons/15,14 L Regular Unleaded
SAE 30 (above is required by the operator.
Owners Manual - Page 5
....
(1) 1/2" wrench
Tire pressure gauge
(2) 7/16" wrenches
Utility knife
Pliers
When right or left unassembled for charging instructions). • For battery and battery cable installation see "RE- Ensure ...: You may now roll your tractor off skid.
Continue with the exception of those parts left hand is clear of other people and objects. PLACING BATTERY" in the "Service and Adjustments...
Owners Manual - Page 6
..., check to -rear for best cutting results. (Tires must be properly leveled. CHECK DECK LEVELNESS
For best cutting results, mower housing should be properly inflated for shipping purposes. WHILE... control is adjusted comfortably and tightened securely. ✓ All tires are routed properly around pulleys and inside all belt keepers.
✓ Check wiring. CHECK FOR PROPER POSITION OF ALL...
Owners Manual - Page 10
... at slow speeds may notice displacement or turfing of grass being mowed.
• The average lawn should be used for long periods of movement is controlled by the forward and reverse drive pedals... drive pedal. The cutting height range is depressed. For healthier and better looking lawns, mow often and after moderate growth.
•
10
For best cutting performance, grass over ...
Owners Manual - Page 16
... CHART
➀ SPINDLE ZERK
➀ SPINDLE ZERK
➀ FRONT
WHEEL BEARING ZERK
➀ STEERING
SECTOR GEAR TEETH
➀ FRONT
WHEEL BEARING ZERK
➁ ENGINE
➀ MANDREL
ZERKS
BEFORE EACH USE
• Check engine oil level.
02501
• Check brake operation.
• Check tire pressure.
• Check operator presence and ROS systems...
Owners Manual - Page 17
...tire sealant may cause tire damage.
TO CLEAN BATTERY AND TERMINALS
Corrosion and dirt on mandrel assembly.
• Install and tighten blade bolt securely (45-55 Ft.
MAINTENANCE
TRACTOR
... dry concrete or paved surface, then brake must align with stamped "THIS SIDE UP" facing deck and mandrel assembly. Adding or checking level of tires for normal use. IMPORTANT: SPECIAL BLADE BOLT IS ...
Owners Manual - Page 19
... in "PRODUCT SPECIFICATIONS" section of each season. NOTE: Operating the engine with automotive type wax.
MAINTENANCE
AIR FILTER
Your engine will not run properly using a garden hose or pressure washer to clean the outside tractor and mower. Service air cleaner more often under dusty conditions. Spark plug type and gap setting...
Owners Manual - Page 20
...sure the attachment clutch control is directed AWAY from your garden hose to reach. Turn the water on the tractor,
... Move the tractor's attachment clutch control to lock the adapter on your lawn, near
enough to using mower again. • Plug any holes in... adapter and push the adapter onto the deck washout port at the left end of its deck wash system.
Move the tractor's attachment ...
Owners Manual - Page 21
... and disconnect mower suspension arm (A) from chassis and rear lift link (C) from electric clutch pulley (M). remove retainer spring and washer. • Go to its lowest position.
Have a ... in contact with plug.
INSTALL ANTI-SWAY BAR (S) (IF EQUIPPED)
ANTI-SWAY BAR (S)
TOWARDS TRANSAXLE
TOWARDS MOWER DECK
90° END
INTEGRATED WASHER END
Fig. 30
A
M
F
OP
Q
C E
H
D S B D...
Owners Manual - Page 22
...ANTI-SWAY BAR
T. Work from left rear tire in front of transaxle. M
Fig. 36
IMPORTANT: CHECK BELT FOR PROPER ROUTING IN ALL MOWER PULLEY GROOVES. • Raise attachment lift...in same position/location.
• Pivot the integrated washer end of anti-sway bar (S) towards mower deck bracket on opposite side of tractor. ANTI-SWAY BAR (S) LOCATION
TRANSAXLE BRACKET (T)
LOCATED BETWEEN REAR
TIRES...
Owners Manual - Page 23
... lift link adjustment nut (A) to the left to lower the mower, or, to ...park tractor on tires. FRONT-TO-BACK ADJUSTMENT (See Figs. 39 & 40) IMPORTANT: Deck must be adjusted so the front tip is 1/8" to 1/2" (3,1 to 12,7 mm) ...1/8" to 1/2" (3,1 to raise the mower. Measure distance (B) to -side.
Protect your lawn and lead you to think the mower is necessary, see steps in its highest position....
Owners Manual - Page 24
...)
• Park tractor on a level, dry concrete or paved surface,
depress brake pedal all the pulleys except the idler
pulley. • With a 3/8" breaker bar, shift the idler arm counter- Lbs/40 Nm. • Replace mandrel covers on the cutting deck. • Place the belt around all the way down and engage parking brake. 2. Pull...
Owners Manual - Page 25
... INSTALLATION -
1. Carefully work belt down around electric clutch and onto engine pulley (G).
3. Reinstall anti-rotation link (B) on right side of tractor.
4. SERVICE AND ADJUSTMENTS
TO REPLACE MOTION DRIVE BELT (See Fig. 44)
Park the tractor on bottom side of left footrest. For assistance, there is a belt installation guide decal on level surface...
Owners Manual - Page 29
.... 9. Corroded battery terminals. 3. Loose or damaged wiring.
13. Engine flooded. 3. Dirty air filter. 2.
Weak or dead battery. 4. Clean battery terminals. 6. Bent blade mandrel. 3. Replace blade mandrel. 3. Depress brake pedal. 2. Bad spark plug. 4. Engine valves out of fuel. 2. Replace fuel filter. 5. Faulty operator presence switch(es).
1. Dirty air filter.
4. Water...
Owners Manual - Page 30
....
5. Worn, bent or loose blade.
6. Replace with attachment clutch engaged
1. Loose or damaged wiring. 5.
Frozen idler pulley. 4. Clean around mandrels to slower speed.
3. Check tires for proper air pressure.
6. Turn switch "ON". 2.
Clogged mower deck vent holes from buildup 11. Wet grass.
3. Replace mower drive belt.
9. Poor cable connections. 3. Loss of...
Owners Manual - Page 32
... emission components, or running engines above specified and recommended engine speeds as belts, pulleys, spindle housings, bearings, blades, rods, height adjusters, caster/anti scalp wheels etc...; (c) Rust and corrosion; Reinforced Stamped (Armor Protected) 10 Year Limited & Fabricated Limited Lifetime, Deck Warranties. are for use of warranty service. The following :
(e) Failure to ...
Owners Manual - Page 33
...,
Product/Component
other than Rental Use)
Riding Lawn Tractors:
Frame, Chassis, Front Axle
5 Years
No Warranty
Engine*
*
*
Transmission (if made by Husqvarna/Peerless)
3 Years
No Warranty
Transmission (if third party)**
* *
* *
XLS Models only - Armor
Protected Limited Warranty
10 Years
No Warranty
Fabricated Deck shell. Armor Protected Limited Warranty. Product # 967003902...
Similar Questions
Wheel Torque Difference
The right wheel has adequate torque the left wheel has very little torque. This causes the blower to...
The right wheel has adequate torque the left wheel has very little torque. This causes the blower to...
(Posted by valentineg52 1 year ago)
Ee Symbol Is On How Do I Fix
hello how do I fix the EE symbol gt52xlsi.
hello how do I fix the EE symbol gt52xlsi.
(Posted by Danbemton 1 year ago)
Do I Have To Remove The Mower Deck On My Gt52xlsi Mower In Order To Replace The
(Posted by jyahlb 2 years ago)
Riding Lawn Mower
I'm trying to find torque specs for riding mower itself
I'm trying to find torque specs for riding mower itself
(Posted by Linwoodwebb4 3 years ago)
Pto Won't Engage
Gt52xlsi with dreded smart switchLight for pto flashing and won't engage doesn't flash until the sta...
Gt52xlsi with dreded smart switchLight for pto flashing and won't engage doesn't flash until the sta...
(Posted by Shipleywilliam 4 years ago)