Humax IR-FREE Support Question
Humax IR-FREE Support Question
Find answers below for this question about Humax IR-FREE.Need a Humax IR-FREE manual? We have 1 online manual for this item!
Question posted by jmali on February 1st, 2014
How Do I Get Bein Sport
Smart card does not show all channels
Current Answers
Answer #1: Posted by hzplj9 on February 11th, 2014 6:48 AM
hzplj9
Member since:
June 25th, 2012 Points: 4,867,900
Member since:
June 25th, 2012 Points: 4,867,900
If there are channels missing from your card I would contact the company responsible for supplying the card. If the channel is available in your area and you pay for it they should resolve the issue. Alternative is if they are a free-to-air channel I would try a retune as some channels could well have moved to a different transponder
Related Humax IR-FREE Manual Pages
User Manual - Page 4
... result in electric fire or shock.
3. CONNECTION TO THE TV • Disconnect the product from the mains before connecting or disconnecting the cable from the satellite dish. Failure to do so can damage the TV.
9. **
This product has been manufactured to comply with liquid should not be exposed to liquid of...
User Manual - Page 7
...TV Guide GB20 5.1 Viewing TV Guide GB20 5.2 Using TV Guide GB21
6. Installation GB23 7.1 System Setting GB23 7.2 Organising Channels GB24 7.3 Channel Search GB25 7.4 Status GB26 7.5 Default Setting GB26
8. Channel List GB18 4.1 Simple/Advanced Channel List GB19 4.2 Option in Channel List GB19
5. Software Update GB27 8.1 OTA (Over the Air GB27 8.2 Software Update from PC GB28...
User Manual - Page 9
... volume bar.
**
4. TV LED Green light is emitted when the product is in TV mode.
**
6. CH-/CH+ or VOL-/VOL+ BUTTON Moves the TV/Radio channel or volume up/down.
**
5. STANDBY LED Red light is emitted when the product is subject to change without notice. STANDBY BUTTON Switches between operation and...
User Manual - Page 10
... when the product is in radio mode.
**
7. STANDBY BUTTON Switches between operation and standby modes.
**
3. CH-/CH+ or VOL-/VOL+ BUTTON Moves the TV/Radio channel or volume up/down.
**
5. STANDBY LED Red light is emitted when the product is in standby mode.
**
2. SMARTCARD SLOT A slot for a Smartcard
**
Note: The front...
User Manual - Page 13
**
1. LNB OUT Connects another digital satellite receiver.
**
3. POWER CORD Connects to change without notice. RF IN Connects to the TV or VCR using an RCA cable.
**
6. RF OUT Connects to the RF ... or cable.
**
7. AUDIO L/R Connects to update software.
**
4. RS-232C Connects to the PC to the TV or VCR using an RF cable.
8. LNB IN Connects a satellite antenna cable.
**
2.
User Manual - Page 14
...**
Displays TV Guide.
**
9. Mute
**
Mutes or unmutes the audio temporarily.
**
2. ARROW BUTTONS
**
Changes the channel or moves the cursor up, down left or right.
**
10.EXIT
**
Exits all On-Screen Display (OSD) screen....
**
11.HEPG
**
Switches between Humax EPG and Standard EPG.(Not available in IR-ACE II UBI)
**
12.VOL+/VOL-
**
Adjusts the audio volume.
**
13.TEXT
**
...
User Manual - Page 17
...
setting information, channel list and Smartcard information you select Motorised dish, channel search will be skipped. You can search satellite and channels. After completing the...satellite. Satellite search will operate automatically. Select the kind of dish to save.
Note: Humax Auto Search is not available in the antenna setting menu. 2. You can configure the setting in IR...
User Manual - Page 18
After all setting is complete, you can set an option. Press the OK button to receive accurate TV
guide information. Select Current Time/Time Offset/Daylight-Saving Time and set the current time. Note: Set the current time to complete the installation wizard. You can view the result screen.
User Manual - Page 19
...)
The lists of favourite channels • Auto : The list of channels classified by frequency in favourite channel list.
• Smartcard : The list of channels classified by Smartcard in favourite channel list (if available).
• FTA : The list of channels classified by free to air in favourite channel list.
• CAS IR : TThe list of channels classified by CAS Irdeto in...
User Manual - Page 20
...channel list is 8272. (IR-ACE II UBI only)
• If you have forgotten your PIN-Code, please contact your choice. When unlocking a locked
channel, a pop-up will appear.
Delete
**
To delete a channel...is displayed.
2. Press the EXIT button to save the changes.
**
Add
To add a channel to confirm your local product distributor.
A pop-up requiring your PIN-Code. Select Yes and ...
User Manual - Page 22
...button to Nilesat.
• Humax EPG is set to display the corresponding channel group and select the sub channel group. Press the HEPG button to you press the RED button, the style of TV... guide changes in IR-ACE II UBI. Humax EPG
**
Note:
You can view the programme information of all channels using Humax EPG. Group
Press the BLUE button. **
You ...
User Manual - Page 23
... MENU button. 2. Enter the PIN-Code using the NUMERIC(0-9) buttons.
**
Tip: • The default PIN-Code is 0000. • The default PIN-Code is 1234. (IR-ACE II UBI only) • If you have forgotten your PIN-Code, please contact your previous PIN-Code.
**
1.
Select Parental Control and press the OK...
User Manual - Page 24
... your local product distributor.
**
1.
A/V Output Setting You can configure the installation setting and perform channel search.
Select System Setting and press the OK button. OSD Language can set the default language for...: • The default PIN-Code is 0000. • The default PIN-Code is 8272. (IR-ACE II UBI only) • If you set the Wakeup time and Sleep time, the product ...
User Manual - Page 25
... you want and press the OK button.
**
Organising Satellite
You can delete, move . Select a channel in the channel list and press the OK button. Select from the satellite list and press the RED button. Organising TV/Radio Channels>Organising All Channels
You can delete a satellite. Select Organising Channels and press the OK button.
Move
Press the GREEN button...
User Manual - Page 26
... can set antenna and LNB information to Enable before performing channel search. Automatic Search
You can set antenna and LNB information to search services
Motor Antenna
**
Set Motorised System in IR-ACE II UBI. Refer to the 3.2 Humax Auto Search.
**
Antenna Setting
You can automatically search the satellite without entering any other information.
User Manual - Page 27
... components. Irdeto SW Update
When OTA is available, Irdeto SW Update is completed, the installation wizard pops up automatically and assists channel search.
Enter your PIN-Code. **
1.
Mail Message
You can receive mail sent by the broadcasting company.
**
You can update software automatically or manually.
When completing the software update, the product...
User Manual - Page 28
...that of the
manufacturer. 4. The equipment should have the most up automatically and assists channel search. Update software when the signal strength and quality is not favorable,
and the ...release the software via satellite will not activate while software update takes place. • You cannot schedule recording during software update, fatal damage may not be received). Update may be ...
User Manual - Page 30
...Check if the channel is currently on air. No message displayed on the front panel. (The product will increase the signal levels received. • Replace...the power cable to ensure that the antenna setting in an obstacle-free place. • Make sure there is no mobile phone or ...your dish alignment is correct. • Change the satellite dish for further instructions.
1. No picture on ...
User Manual - Page 31
.... • Replace the batteries in the remote control for Channel List and Installation. (IR-ACE II UBI only)
8. Channel search does not work. • Make sure that the...channels. • Check that you wish to view. • Contact your TV set .
6. Remote control does not operate. • To control the product, the top end of the remote control should point directly towards the receiving...
User Manual - Page 32
... damage has occurred. Signal is internally short.
Smartcard is not pointing at Adjust dish alignment.
Satellite dish is inserted correctly.
Audio not available.
Replace LNB Cable. Error message
Possible causes
What to confirm that the channel has audio options.
Problem with the appropriate model that it is too small. Remove the alien...
Similar Questions
Need To Do Sw Update For Humax Satellite Receiver Ir-hd1000
My Receiver is Humax IR-HD1000SW ver. MHZZSIR 1.00.05 (this is the working SW).I need to update to t...
My Receiver is Humax IR-HD1000SW ver. MHZZSIR 1.00.05 (this is the working SW).I need to update to t...
(Posted by YasirAbuelhassan 4 years ago)
Problem With My Satellite Receiver
my humax ir free (ir.deto) when I switched off the power it gave continuous system initializing scre...
my humax ir free (ir.deto) when I switched off the power it gave continuous system initializing scre...
(Posted by mkaliouby 8 years ago)
Humax Hd Free Model Ir1020hd
humax hd free model ir1020hd it's working on bein sports
humax hd free model ir1020hd it's working on bein sports
(Posted by yousafyameen 10 years ago)
Update The Software Of Humax Receiver Ir-dh1000 Manually
WHAT IS THE FREQUANCY TO UPDATE THE SOFTWARE OF HUMAX RECEIVER IR-DH1000 MANUALLY?
WHAT IS THE FREQUANCY TO UPDATE THE SOFTWARE OF HUMAX RECEIVER IR-DH1000 MANUALLY?
(Posted by akhdair 12 years ago)