Hoover UH70200 Support Question
Hoover UH70200 Support Question
Find answers below for this question about Hoover UH70200.Need a Hoover UH70200 manual? We have 1 online manual for this item!
Question posted by bchris376 on November 9th, 2015
Changing Belt
bought the right belt. Its too big. Is there a certain way to change it?
Current Answers
Answer #1: Posted by TommyKervz on November 10th, 2015 8:19 AM
TommyKervz
Member since:
January 10th, 2013 Points: 17,776,813
Member since:
January 10th, 2013 Points: 17,776,813
Please read page 12 of the manual from the link below
http://www.manualslib.com/manual/280293/Hoover-T-Series-Uh70110.html?page=12#manual
Related Hoover UH70200 Manual Pages
Manual - Page 1
... TO THE STORE. THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY. IF USED COMMERCIALLY WARRANTY IS VOID.
©2010 Techtronic Floor Care Technology Limited.
All Rights Reserved. #961006035 ID100685-R1
Owner's Manual
Operating and Servicing Instructions
Español - página E1
www.hoover.com
IMPORTANT: READ CAREFULLY BEFORE ASSEMBLY AND...
Manual - Page 2
... To Use...6 Vacuum Description 6 On-Off Switch 6 Suction Only Mode 6 Cord Rewind and Storage 6 Folding Handle 6 Carpet Height Adjustment 7 Tools ...7 Select Proper Tool 7 Removing Hose 7 Attach Wand And Tools 7 Stair Cleaning 8 How To Clean Tools 8 Maintenance...8 Dirt Cup...9 Filters...9 Brushroll...11 Hose...11 Powered Hand Tool 11 Headlight...12 Belt...13 Troubleshooting...
Manual - Page 3
... when rewinding (cord rewind available on floor. WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:
• Fully assemble before operating. • Operate vacuum only at bottom of stairs on select models only). • Unplug before connecting Powered Hand Tool. • Do not pick up flammable or combustible liquids...
Manual - Page 4
...8226; Avoid picking up hard, sharp objects with this appliance has a polarized plug (one way. Do not expose machine to freezing temperatures. • Brushroll continues to turn while product...put the cleaner in any way. WARNING:
• To reduce the risk of electric shock, this product, as they may cause damage. • Store in upright
position. Do not change the plug in "Suction Only...
Manual - Page 5
...the vacuum base and set aside until secure.
1.6 Place Crevice Tool into Wand and slide into vacuum base... into vacuum base. Handle* B. Powered Hand Tool* D. B
C
EG
H
D I .
Make sure all parts from images shown. Pivot cup into vacuum body ... on left back side (B) of vacuum and place Upholstery Tool on side of dirt cup into vacuum. Vacuum Base C. Dirt cup is secure ...
Manual - Page 6
...
6
11
10
7
8
9
*Available on select models only)
2.4
2.4 Grasp the end of cord reel. The vacuum is visible on side of the plug and pull to release cord from images shown. 6 To return cord for Suction ...the cord is reached. ON/OFF Switch 3. Carry Handle 5. To turn vacuum OFF, push switch again. To turn vacuum ON, push ON/OFF switch once.
When red tape is shipped with...
Manual - Page 7
...Hand Tool may be used in tight spaces, corners and along edges in upright position unless vacuum is ready for upholstered furniture, draperies, mattresses, clothing, automobile interiors, and carpeted stairs. ... tool use when handle is difficult to the next higher setting.
3.
IMPORTANT
If the vacuum is in "Suction Only Mode" for very deep pile carpet, where easier pushing effort ...
Manual - Page 8
.... To avoid personal injury or damage, and to activate after following the above steps, your vacuum will stop running. Dirt cup is unplugged and motor cools for stair cleaning. Check brushroll for... cyclonic filter, Rinsable filter, and HEPA filter. 4. Stair Cleaning
3.4 Lift vacuum by stepping on the "Suction Only Mode" pedal (available on select models only) as shown in diagram 2.3. ...
Manual - Page 9
..., push dirt cup door release lever (B) to open .
4.7 Pull on the filter to open dirt cup door (C).
C B
D
4.5 Place bottom of injury from moving parts, unplug vacuum before servicing.
Replace dirt cup as described in performance. To reduce the risk of filter. CAUTION !
Replace filter, tab side out. Ask for Hoover®...
Manual - Page 10
... tap out dirt and debris. To reduce the risk of injury from moving parts, unplug vacuum before servicing.
IMPORTANT
DO NOT RINSE OR WASH the Carbon Filter.
IMPORTANT
4.8
DO NOT ... to Buy: Filter Made With HEPA Media
When used and maintained properly, your Filter should align on vacuum.
!
Replace dirt cup as described in slots, pull filter frame (A) straight out. What to be cleaned...
Manual - Page 11
...per model)
!
CAUTION !
4.18 A
To reduce the risk of injury from moving parts, unplug vacuum before servicing.
4.17 To remove hose for tool use sharp objects to the unlock position.
4.15 ...16 Reposition bottom plate, aligning the three tabs along front edge of injury from moving parts, unplug vacuum before servicing.
4.18 Turn tool so bottom faces up . Slide red lower latch to Lock ...
Manual - Page 12
...is facing up.
To reduce the risk of injury from moving parts, unplug vacuum before cleaning or servicing. To check the belt, refer to the unlock position.
4.26 Lift off lens.
To reduce the...22 Pull old bulb straight out of electrical shock, unplug vacuum before servicing.
4.24 A
The belt is located under the bottom plate of the vacuum and should be checked from time to time to be ...
Manual - Page 13
... have the metal pulley
4.28
F
4.29
E G
IMPORTANT
Rotate brushroll manually to Buy: Belt
Use only genuine HOOVER® belts with your vacuum.
Belt (continued)
What to make sure belt is not twisted.
13 Actual model may vary from images shown. When purchasing a new belt for models with the three slots in nozzle. HOOVER® part No...
Manual - Page 14
... does not work Dust escaping from brushroll - Thermal Protector activated.
3. Unplug and allow vacuum to appropriate setting for 30min. (This willl reset the thermal protector)
1.Rinsable Filter and/ or Filter
1. Clean Rinsable Filter and or Filter made
made 4. Replace belt - Pg.12.
4. Pg. 11. Check Brushroll - Carpet height setting is ON.
6. Set...
Manual - Page 15
... authorized service outlet locations call 1-800-944-9200; This will only result in Glenwillow for service. If you . • For an automated referral of the vacuum.) PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE.
15 Follow the service center link to Hoover®, Inc., Company in delay. 6.
Manual - Page 16
...as maid, janitorial and equipment rental services), brushroll, belt, improper maintenance of the product, damage due to you specific rights; For an automated referral to authorized service outlets in...MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE, ARE DISCLAIMED. This Warranty shall be paid one way. This warranty gives you , to products purchased outside the United States, including its...
Similar Questions
How To Change Belt For Power Nozzle?
How to change belt for power nozzle?
How to change belt for power nozzle?
(Posted by Missionnews777 1 year ago)
I Need To Put The Bottom Part Of The Vac Together
I had to take apart the part of vac that holds the roller and the belt. I took it apart and now when...
I had to take apart the part of vac that holds the roller and the belt. I took it apart and now when...
(Posted by pollmiff 10 years ago)
My Hoover Uh70200 Shuts Down While In Use.
My Hoover UH70200 shuts down while in use. I have unplugged it let it sit for 30-60 minutes and it w...
My Hoover UH70200 shuts down while in use. I have unplugged it let it sit for 30-60 minutes and it w...
(Posted by dellabenveniste 11 years ago)