Haier HWM70-918NZP Support Question
Haier HWM70-918NZP Support Question
Find answers below for this question about Haier HWM70-918NZP.Need a Haier HWM70-918NZP manual? We have 1 online manual for this item!
Question posted by sariaabdeali1 on November 16th, 2022
When Power On And Then Start Is Pressed, Machine Keeps Blinking On 2 And Stuck.
No drum movement, and doesn't drain automatically when tub filled for testing.Had to manually open back and drain it.Photos attached for reference
Current Answers
Answer #1: Posted by HelpHero on November 16th, 2022 2:42 PM
HelpHero
Member since:
September 3rd, 2022 Points: 523,380
Member since:
September 3rd, 2022 Points: 523,380
* Verify the drain pump filter (where applicable) is clear (The filter is acccessible through the door at the bottom of the unit)
* verify the drain hose is not pushed too far into the standpipe (Siphon condition)
* Verify the drain hose is not kinked or crimped.
If problem persist contact Haier Appliances at 1-877-337-3639 or visit
I hope this is helpful? PLEASE "ACCEPT" and mark it "HELPFUL" to complement my little effort. Hope to bring you more detailed answers.
Helphero
Answer #2: Posted by SonuKumar on November 16th, 2022 8:56 PM
SonuKumar
Member since:
May 9th, 2021 Points: 16,621,300
Member since:
May 9th, 2021 Points: 16,621,300
Please respond to my effort to provide you with the best possible solution by using the "Acceptable Solution" and/or the "Helpful" buttons when the answer has proven to be helpful.
Regards,
Sonu
Your search handyman for all e-support needs!!
Related Haier HWM70-918NZP Manual Pages
User Manual - Page 1
User's Manual Fully Automatic Washing Machine
This manual is for HWM70-918NZP
Index
Safety precautions 2 Packing list 4 Names of the parts 4 Installation and
adjustment 5 ...; Trouble-shooting Answer
to question 15 Specification 16
Please read this manual carefully before using. Retain it for future reference.
0030809432
User Manual - Page 2
... temperature for 2~4 hours and then use the washer in damage of the machine or injure the personal safety of the user.
Please check if the power receptacle has good earthing condition before using to guarantee your safety.
Please check if the water faucet is open, and if the connection of the water...
User Manual - Page 3
..., do not block the ventilation hole with carpet.
Do not put wet laundries on the water surface easily, please be careful especially,for fear damage.
Do not stretch hands into the working washing machine.
Keep the machine away from direct sunlight and heat source like the raincoat, bike covers etc. to...
User Manual - Page 4
...) Filter cover(2 pieces)
Balance ring Inner tub Pulsator
Control panel film Front control board
Cabinet Fixed foot(3 pieces)
Adjustable foot
Liquid whitener inlet Screw cover(right) Adjustable foot film
Water inlet valve Water absorption cushion
Back control board Power line Back cover Drain hose
All illustrations in this Manual are given for reference only.
User Manual - Page 5
... the side of the manual.
Adjustable foot
Front
Screw
Bottom plate Carpet The operation of trundle Figure 1
Figure 2
Back Carpet
The washing machine away from the side and... second reference column;
The adjustable foot
5
Installation and adjustment
Please install and adjust the machine according to keep the washing machine in unstable running or stoppage of the machine. Please...
User Manual - Page 6
... faucet, not suitable
The exit end face of the faucet
Connection between the water inlet hose jointer and the water faucet
water inlet hose jointer
1.Press the lower end of the nut.See to Figure 2. (If the faucet is required that the front end shall be longer than 2mm after twisting...
User Manual - Page 7
...If the machine is fastened stable.
2.After installation, open the faucet ... hose are to the jointer. Connection between the water inlet hose and the washer
1.Do not take off the water inlet hose. Release the slider till ... water inlet hose on the faucet to prevent dropping from improper installation position. Press the locking lever.
Insert the water inlet hose into the jointer.
2.Hang ...
User Manual - Page 8
... is needed,please make separate purchase.The inner diameter of the drain hose shall be smooth, and cost such long time that the machine may stop at mid way.
2 Do not trample or press the drain hose.
3 If the drain hose is too long,cut it either at A or at mid point. Take off the...
User Manual - Page 9
...,sand, hairpins etc. Tie the long strips;
Open the water faucet. Confirm that are applicable for the laundries.
For the parts
with heavy soil, please apply detergent on them in the tub. Then insert
the power plug into water with hand. For those laundries with machine. Please repair the damaged cloth...
User Manual - Page 10
...open the
cover,put the softener into the washing tub. Washing powder with color or pattern as they are prone to lose color.
The whitener shall not touch the laundries directly.
Refer to the user's manual...box in the laundries.
The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition...
User Manual - Page 11
... is not pushed, the washing machine will drain automatically,then go on ,press it will automatically switch off the power.
Program Normal Strong
Applicable situation Washing the normal laundries Washing the bigger and heavier laundries
Soft
Washing the woollen textiles or underwear
Quick
Memory
Standard Wool Tub Dry
Washing the laundries with less water
Washing the woollen...
User Manual - Page 12
... 11. Refer to select suitable
procedure program
Even there's no reaction.
4 Push the " Water " button, select suitable water level level
For Standard program, the washing machine will keep the after the power supply is switched on . When a standard cycle is selected, the fuzzy program is required before spin starting. The washing cycle is automatically set the...
User Manual - Page 13
... the power, the delay time program is set to switch off the power and make new selection.
7 Push the " " button,close the top lid
If the top lid is opened when the machine is...program. Refer to set will cut off mode automatically. Otherwise
it in Page 11 for selection. Confirm the operation of "Delay" program
When the "Delay" function is spinning, the machine will ...
User Manual - Page 14
... to pull off the power plug before maintenance. Hang up the power cord and drain hose. Wipe...machine for some time ( about 1 hour), then close the water faucet.
( If needed, you can in fluence the water inlet. Open the top lid
for a long period.
Drain...figure 1)
2 Pull the back cover of the machine and inside the tub. It must be cleaned in time after each ...
User Manual - Page 15
....
The digitron displays E1. Are the laundries put down the drain hose. Is the water pressure too low?
Open the water tap. Open and close the top lid once.
Clean the water inlet valve then open during reserve procedure. The machine does not act
Not wash
Is there power failure? Is the top lid closed...
User Manual - Page 16
... the first use of power failure or the power plug is checking the cloth, it starts spinning.
Some time is needed before it will add water after the power supply is recovered.
When the power plug is inserted,computer board indicator is setting the drain time. performance.
In the case of the machine.
Specification
Injection...
Similar Questions
Haier Washin Machine Is Not Working.
Where can I buy the wire set of the Haier washing machine?
Where can I buy the wire set of the Haier washing machine?
(Posted by madhukachathum 10 months ago)
What Is The Part Number Of This Washing Machine Balance Springs
(Posted by malithfernando10 1 year ago)
My Washing Machine Keeps Freezing
My washing machine keeps freezing, and its takes 12 hours fo it to start cycle. is there a way to re...
My washing machine keeps freezing, and its takes 12 hours fo it to start cycle. is there a way to re...
(Posted by Dijay 12 years ago)