GE WSLP1500JWW Support Question
GE WSLP1500JWW Support Question
Find answers below for this question about GE WSLP1500JWW.Need a GE WSLP1500JWW manual? We have 3 online manuals for this item!
Question posted by rvijay786 on March 25th, 2012
My Washer Does Not Spin, When In Spin Mode It Displays Lo On The Display Screen.
I thought it was due to overload, but i removed all the clothers and still does not unlock or the water is getting drained, please let me konw how to fix this.
I'm using GE Washer WSLP1300
Current Answers
Related GE WSLP1500JWW Manual Pages
Installation Instructions - Page 1
Washers
ge.com
Safety Information 2, 3
Operating Instructions
Control and Indicator Settings . . . . . .5, 6 Loading and Using the Washer . . . .7, 8 Special Washer Features 4
Installation Instructions
Alcove or Closet Installation 12 Electrical Requirements 10 Grounding Instructions 10 Installation Requirements 9 Leveling the Washer 10 Washer Connections for Portable Model 13-16 Washer ...
Installation Instructions - Page 2
...properly installed and located in accordance with or inside the washer.
■ Close supervision is used for several minutes. YOUR LAUNDRY AREA
■ Keep the area underneath and around your... water system. Follow details in a water heater that has not been used .
■ Install or store where it is flammable, do not smoke or use an open .
The instructions in this washer are...
Installation Instructions - Page 3
... panel by removing the fuse or switching off water faucets to relieve pressure on hoses and valves and to operate this appliance if it is moving.
■ To minimize the possibility of fabrics. Do not add these substances
around your washer or dryer during operation.
■ The laundry process can produce a toxic gas which...
Installation Instructions - Page 4
... Detergent Dispenser:
To Use the Fabric Softener Dispenser:
Use only liquid fabric softener. Remove the drawer by opening and push the dispenser drawer straight in the washer. • Add the detergent and fabric softener to the dispenser.
To clean: Open the filter. Before starting the washer: • Load the laundry in . If necessary use a soft cloth to...
Installation Instructions - Page 5
... TO LOCK/UNLOCK
CONTROLS
OPTIONS
ULTRA CLEAN
LOAD SENSING COLORS WHITES
DELICATES SPEED WASH
CUSTOM CYCLE
START
PAUSE
POWER
CYCLES
D1EtoL1A8YHWOUARSSH
Before starting the washer: • Load the laundry in the ...would like to include in the washer. • Add the detergent and fabric softener to rotate before water fills in the tub.
NOTE: When using the LOAD SENSING feature, it ...
Installation Instructions - Page 6
...Maximizes detergent efficiency by adding CLEAN water in steps and slowly diluting the
detergent to your specific laundry needs. MINUTES REMAINING
Displays the time remaining in the washer basket.
4 WASH CYCLE
These...CUSTOM Manually selected options of holes in the wash cycle. NOTE FOR PORTABLE MODELS: When using a one or two lightly soiled items WASH that the machine defaults to can be changed...
Installation Instructions - Page 7
... any spills. Safety Instructions Operating Instructions
Loading and using the washer.
The washer will be replaced every 5 years.
Wipe with liquid detergent, then rinse. (Do not use of holes in the display. Drain all water from drain pump and hoses. GE recommends the use harsh or gritty cleaners.)
Fill Hoses: Hoses connecting washer to evaporate. Care and Cleaning of Detergent...
Installation Instructions - Page 8
Operating Instructions Safety Instructions
Loading and using the washer.
WASH LABELS
Machine wash cycle
Normal Permanent Press/ wrinkle resistant
Gentle/ delicate
Hand wash Do not wash
Do not wring
Water temperature
Hot (50°C/120°F)
Warm (40°C/105°F)
Cold/cool (30°C/85°F)
DRY LABELS
Tumble dry
Dry
Heat setting...
Installation Instructions - Page 9
... water at : ge.com In Canada, call 800.GE.CARES (800.432.2737) or visit our Website at 120° to 150°F (50° to 66°C) IN THE WASHER when HOT wash is selected.
• SHUT-OFF VALVES-Both hot and cold shut-off valves (faucets) should be supplied.
• DRAIN-Water may be drained...
Installation Instructions - Page 10
...leveling locks. Do not, under any circumstances, cut or remove the third grounding prong from the power cord. LEVELING THE WASHER- The washer will not fit the outlet installed, have a proper ... modify plug with this appliance; ELECTRICAL REQUIREMENTS
CAUTION: For personal safety, do
not use
GROUNDING INSTRUCTIONS
This appliance must be grounded. This appliance must be supplied with a ...
Installation Instructions - Page 11
... flush the water lines and remove particles that might clog up the water valve screens.
4 CONNECT DRAIN HOSE
Form a U shape on and check for leaks.
Place the hose in a stand pipe without forming a U shape, a siphoning action could occur. Turn the water on the end of the drain hose with the hose pointed toward the drain.
Installation Instructions
WASHER CONNECTIONS...
Installation Instructions - Page 12
...)
Closet door
12 NOTE: The clearances stated on this label are minimums. Consideration must contain at the faucet, drain line
or washer.
7 RUN THE WASHER THROUGH A COMPLETE CYCLE
Check for water leaks and proper operation.
8 REMOVE THE PROTECTIVE FILM COVERING THE CONTROL PANEL
9 READ THE REST OF THIS OWNER'S MANUAL
It contains valuable and helpful...
Installation Instructions - Page 13
ONE-FAUCET CONNECTIONS
Use the hose connector provided with the washer for tightest fit. TO CONNECT THE WASHER:
1 REMOVE THE UNI-COUPLE® HOSE FROM INSIDE THE WASHER BASKET
3 CONNECT TO VALVE INLET
Attach the COLD water supply connector to the rear of the washer.
COLD Water Supply Connector
Drain Connection Faucet Connector
Water Filter
Uni-Coupler Hose
4 TIGHTEN CONNECTOR
...
Installation Instructions - Page 14
... of the washer.
10 INSTALLATION CHECKLIST
Before starting the washer, check to make sure: ❏ Main power is turned on. ❏ The washer is plugged in. ❏ The water faucets are turned on.
❏ The unit is level.
❏ There are no leaks at the faucet, drain line or washer. Insure proper ground exists before use
14
Installation Instructions - Page 15
Locking Collar
2 UNPLUG POWER CORD AND RETURN IT TO THE STORAGE AREA
Hose Connector
5 DRAIN WATER
Drain water from the faucet adapter.
Installation Instructions
TO DISCONNECT THE WASHER:
1 TURN WATER FAUCET OFF
4 DISCONNECT FROM WATER LINE
Move the locking collar down and pull the hose connector down to disengage from the hoses through the hose connector.
3 PRESS THE...
Installation Instructions - Page 16
... POWER CORD INTO A 3-PRONG GROUNDED OUTLET
TO CONNECT THE WASHER:
1 CONNECT TO WATER LINE
Connect HOT and COLD water inlet hoses to the HOT and COLD faucets.
2 CONNECT DRAIN HOSE
Secure the drain hose to the sink or stand pipe.
TO DISCONNECT THE WASHER:
Cable Tie
1 TURN WATER FAUCETS OFF
Cable Tie
Sink
Stand Pipe
2 UNPLUG POWER...
Installation Instructions - Page 17
... after spinning. Review the charts on and fill hose is not clogged or kinked. Ensure wall faucets are on the following pages first and you call for service. dr
■ Indicates water has not drained from washer.
LE
■ Indicates washer has leakage. ge.com
FF
■ Indicates washer failed to call for service...
Reposition laundry evenly in...
Installation Instructions - Page 18
... need replacement after each use a brush or toothpick to clean the screens in washer
Water supply is turned off or improperly connected
Water valve screens are connected to correct faucets.
• Turn off after 5 years.
• Use less detergent. Remove screens and use .
• Check condition of the fill hoses; Use less soap if you have soft water, a smaller load or a lightly...
Quick Specs - Page 2
...drawing.
prtbl_stnry_bifl_wshr_inst.eps
WSLP1500J
GE Spacemaker® Portable Washer
Dimensions and Installation Information (in relationship ...
2 x 4
WSLP1500 WSLS1500
Standpipe 33" Minimum If Less Than 33" Use Syphon Break Kit WH49X228
Service Cord Entry at least two wall studs and ...dryer. The center line of the 2x4 should be removed from the bottom of the dryer.
2. Locate ...
Quick Specs - Page 3
...WSLP1500JWW
Specification Revised 10/09
360429 Offer better wash results and longer fabric life
• One Wash/Spin Speed - Offers water and energy savings • Stainless Steel Basket - Simplify cycle selection and provide accurate cycle times
• One-Touch Loading Sensing - Provides reliable cleaning performance for regular clothes
• Five Water Levels - WSLP1500J
GE...
Similar Questions
Spin Mode
Machine makes loud dinging noise like something is loose when in spin mode. Filter is clean
Machine makes loud dinging noise like something is loose when in spin mode. Filter is clean
(Posted by gthorstad 5 years ago)
The Display Doesn't Read Anything And Won't Go Into Spin.water Drains But No Spi
(Posted by Anonymous-138739 9 years ago)
Ge Wslp1500 Won't Spin. When It Enters Spin Mode, It Displays Lo On Screen
GE WSLP1500 won't Spin. when it enters spin mode, it displays Lo on screen I think I may have overl...
GE WSLP1500 won't Spin. when it enters spin mode, it displays Lo on screen I think I may have overl...
(Posted by upsritz79 11 years ago)
My Washer Keeps On Going To Pause On Rinse And Spin Mode, On Quick Wash
FOR SOME REASON MY WASHER IS GOING TO PAUSE WHEN IT GOES IN TO RINSE AND SPIN MODE ON QUICK WASH.
FOR SOME REASON MY WASHER IS GOING TO PAUSE WHEN IT GOES IN TO RINSE AND SPIN MODE ON QUICK WASH.
(Posted by plether62 12 years ago)