Power Locks

Using the forums, I tracked it down to the driver’s side power door lock actuator (part #72155-S5P-A11) : 

However, there was no complete description on how to remove and replace this part, so here’s my stab at it after spending the better part of 2 hours fixing mine. I tried to document it with pictures, but it was getting dark and cold on a January afternoon in Colorado, so I wasn’t as thorough as I would have liked to have been.

First, follow this EXCELLENT illustrated thread (http://elementownersclub.com/forums/showthread.php?t=41442)for directions on removing the door panel and exterior handle.

Now that you're back.... this is your nemesis, the actuator, firmly lodged on the inside of the door. I've already unplugged its two wiring harnesses :
44215

Next, you need to remove the entire white unit, which the actuator is attached to, from the door. To do so...

1) Remove this plug by pushing it out from the inside :
44216

2) Remove the screw indicated by the black arrow, which holds the window rail inside, in order to make removal easier. Also, unscrew the lock handle indicated by the yellow arrow :
44217

3) Remove these three screws : 
44214

4) Pop off any linkage bars needed and carefully remove the assembly by lowering it down and sliding it out from the inside of the door.

This is what you'll have in hand :
Remove 1 screw and press on the white tabs (as indicated) to remove the metal bracket. The actuator will then slide out by pressing two additional tabs on its ends.
44212

Installation is everything in reverse order